Preconfigured with solid mounting hardware for standard commercial upright microscopes, our MXMS-115cri microscope translators are designed to be stable XY translators for fixed stage experiments. The MXMS-115cri translators have a full 25 mm of XY translation and have full crossed roller bearing stages in all three locations for precise adjustment and high load requirement. This motorized translator can be controlled with any of our e series controllers. Our controllers drive the stage through a closed loop interface between the controller and the motor encoder. The closed loop connection ensures 0.2 µm resolution. The encoder coupling also enables the use of the DR1000 digital readout for repeated or relative positioning requirements. All cables are shielded to ensure noise-free operation during sensitive electrophysiology experiments.
The K-Kit option is needed for the correct mounting configuration based on the matching upright microscope model.
All Clamps are SOLD SEPERATLY
- Compatible with fixed-stage upright microscopes
- Full cross roller stage support
- Preconfigured mounting hardware
- RoHS compliant→
- Maximum load 200 lbs, centered
- Travel / axis 1.0 inch (25mm)
- Minimum controllable motion 0.2 µm
- Backlash ≤ 5.0 µm
- Point to point accuracy ± 2.0 µm
|Manual / Motorized||No|