MX6600 Series Manipulator
The MX6600 hydraulic micromanipulator is the integrated version of our MX1600 series manual crossed roller bearing manipulator. This design integrates the metal bellows system with our precision crossed roller stage to ensure precision movement and long life. The fine positioning dials on three axes use our ultrafine 127TPI adjustment screws to enable 0.5 μm resolution. The coarse positioning knobs on four axes incorporate 20TPI screw drive positioning for smooth motion in the X, Y, Z, and probe axes. The probe axis can be adjusted to the desired angle of approach from 0° to 180°.
- Water-based hydraulic system
- Less than 2 μm drift / hour
- Ideal for intracellular recording
- Holds mounting rods from 3- to 10-mm in diameter.
Travel / axis
- Total: 0.80 inch [20 mm]
- Fine: 0.2 inch [5 mm]
Minimum controllable motion
- Coarse: 10 μm
- Fine: 0.5 μm
Hydraulic mechanism maintenance:
Hydraulic manipulators come with a two-year warranty on the hydraulic drive. They will be refilled at no charge in the first 24 months. There is a nominal refilling fee after that.
|Manual / Motorized||No|