MC400 & MC500 MOTORIZED CONTROLLER SYSTEM
From $402.00
To $612.00
MC400 and MC500 series controller, open loop
The MC401 and MC400 open loop DC controllers are designed to drive our 400 series actuators. These controllers allow the user to operate from one to four of our 400 series actuators of any travel length. These controllers use a wall mounted DC power supplies as their source. These noise-free DC controllers, along with our 400 series drives, can be used in proximity to electrophysiology experiments.
Product Features
- Economical DC controller
- Variable, high resolution speed control
- Preset rapid and medium speed settings
- RoHS compliant→
Performance Specifications
- With 400 series actuators under 8 pounds load
- Power requirements 100-240 VAC, 50-60 Hz
- Universal switching AC/DC power supply required
Maximum speed:
- Rapid 800 μm/sec
- Medium 100 μm/sec
- Slow Range / High 35 μm/sec
- Slow Range / Low 5 μm/sec
*These products are configured per customer order. Siskiyou sales team will contact you with a ship date after your order*
MC500 and MC501 open-loop DC controllers are specifically designed to drive series 500 and 500MM (or -XMM) actuators. The 4-axis MC500 controller allows a user to operate as many as four series 500 actuators of any travel length. It has two preset speed settings: rapid (300μm/second) and medium (100 μm/second). The third speed selector (slow) has a variable 330° potentiometer that enables settings from high speed (30μm/second) to low speed (10μm/second). With the speed selector set at the slowest settings, consistent 1.0 μm moves are easily made by the simple bump of an axis button. The MC500 controller uses a wall mounted DC power supply as its source. This noise-free DC controller, along with our 500 series drives, can be used in proximity to electrophysiology experiments.
Product Features
- Economical DC controller
- Variable, high-resolution speed control
- Preset rapid and medium speed settings
- Variable, “slow” speed range
- RoHS compliant→
Performance Specifications
- Power requirements 100-240 VAC, 50-60 Hz
- Universal switching AC/DC power supply required
Maximum speed
- Rapid 300 μm/second
- Medium 100 μm/second
- Slow Range / High 30 μm/second
- Slow Range / Low 10 μm/second
*These products are configured per customer order. Siskiyou sales team will contact you with a ship date after your order*
| Open / Closed Loop | Open Loop |
|---|