LDP-1 Series Positioner
As low as $0.00
positioner, laser diode
The LDP, back adjustable laser diode positioner uses the XY & tip/tilt mechanics from our popular BFT-5 fiber positioner to create a compact 4-axis laser diode mount. The X and Y axis have 0.12-inches (3mm) of travel and are adjusted via 80TPI fine pitch screws. Tip/tilt motion uses 80TPI screws and has a total of 8‑degrees of motion. Comes with 8-32 (M4) tapped holes on two edges for convenient mounting to PR series post. The LDP-1B has 4-40 clearance holes and the tip/tilt adjustments on the back side, allowing for through the bulkhead adjustments.
- 80 pitch adjustment screws
- 4 axes of adjustment
- Safety shutter
- Vacuum compatible versions available upon request
- X and Y axis: 0.12 inch (3.1 mm)
- Pitch and Yaw: 8°
Minimum controllable motion
- X and Y axis: 1 μm
- Pitch and Yaw: 4.8 arc sec.
*MINIMUM CONTROLLABLE MOTION BASED ON 1° OF ROTATION
Check items to add to the cart or