The LDP, front adjustable laser diode positioner uses the XY & tip/tilt mechanics from our popular BFT-5 fiber positioner to create a compact 4-axis laser diode mount. The X and Y axis have 0.12-inches (3mm) of travel and are adjusted via 80TPI fine pitch screws. Tip/tilt motion uses 80TPI screws and has a total of 8‑degrees of motion. The LDP-1 has 8-32 (M4) tapped holes on two edges for convenient mounting to PR series post. The LDP-1 also has 4-40 clearance holes accessed from the front so that it can be bulkhead mounted off its back side leaving the tip/tilt adjustment screws accessible from the front.
- 80 pitch adjustment screws
- 4 axes of adjustment
- Safety shutter
- Vacuum compatible versions available upon request
- RoHS compliant→
- X and Y axis: 0.12 inch (3.1 mm)
- Pitch and Yaw: 8°
- X and Y axis 1 μm
- Pitch and Yaw 4.8 arc sec.
|Degrees of Adjustment||No|
|Adjustment Location||Front Adjust|