IXF mb 45° Series Mounting Block
As low as $0.00
45° mounting block, flexure
The IXF2.0mb/45 mounting block allows solid base mounting to the IXF2.0 series flexure mounts. For periscope beam steering configuration this aluminum mounting block has a fixed 45 degree angle. This configuration allows 1/4-20 (M6) cap screw clearance mounting from the top surface or a 1/4-20 (M6) threaded hole(2X) on the bottom surface. Adapted with the top adjust IXF2.0t series, the adjustments are made free of the beam path.
Alternate sides of the IXF2.0mb/45 block allow solid base mounting for full reflective or beam splitter optics using the IXF2.0 series, and IXF2.0bs series mounts.
All the mounting configurations incorporate dowel pin location hole and slot features.
|Mounting Angle||90 DEGREES|