100cr-A Series Stage
The 100cr-A precision crossed roller bearing translation stage offers exceptionally smooth linear travel. The time-tested design has been improved with the addition of more bearing area than similar stages. The increased bearing surface reduces non-linear motion when changing directions, and maximizes linearity towards the end of travel. This aperture version of our 100cr stage is ideal for laser and microscopy applications where a light path through the stage is necessary.
The 100cr-A has a side located non-influencing lock that is integrated with a graduated scale for position readout of 0.04 inches (1 mm). The actuator mounting block and stop block are designed to enable either right or left-hand mounting of the drive device. The actuator mounting block is compatible with our TPI series adjustment screws, 400 and 800 series actuators, as well as standard micrometers.
The spring-loaded 100cr-A stage is stackable for XY positioning requirements and is compatible with our MX-AB for Z-axis applications.
- Integrated scale / lock
- Right and left hand drive adjustable
- Compatible with standard micrometers
- Vacuum compatible versions available upon request
- Maximum horizontal axis load 70 lbs, centered
- Maximum vertical axis load 10 lbs, centered
- Travel 1.0 inch (25 mm)
- Minimum controllable motion
- 20TPI 20 μm
- 40TPI 10 μm
- 80TPI submicron
- 100TPI submicron
- 127TPI submicron
|Degrees of Adjustment||No|
|Manual / Motorized||No|