Hardware
Rotation / Translation Rod Clamp, 0.3-inc

Table Clamps

   Our TC series table clamps offer a secure method of mounting base plates to isolation tables for off-axis mounting applications.  These simple but sturdy clamps can be used in a wide range of applications, such as cable management or base plate mounting.
   The TC-1 and TC-2 use a bent wire to create the clamping finger.  The clamp finger is set at 3/8-inch from its bottom surface and is ideal for holding our FAB and DMB base plates.  The TC-2 has an added locator button that is designed to fit into 1⁄4-20 or M6 counterbores and slots. This feature ensures a more secure grasp of the base plate being mounted.
   The TC-3 is the most flexible of the two designs and uses an adjustment screw to set the height of the clamp. This flexible design allows the TC-3 to be used to clamp devices from 1/16- to 1.0-inch thick. Its solid aluminum construction ensures solid clamping to the mounting surface.

Table / Pedestal Clamp    The TC-4 table clamp and related adapters are ideal for creating pedestal systems with our AS series spacers.  They can also be used separately to create a low profile mounting system.  The TC-4 uses a "captured" design to hold the adapters in place and are compatible with industry standard pedestal systems.