Platforms
Large Mounting Posts / Post
Mount Clamp
Large Mounting Posts
Our LMP series large mounting rods are a solid solution
for supporting
Platforms
or other mechanical hardware. The LMP large mounting post can be
directly mounted to an isolation table top,
PSR series
platform support rods, or
AS series spacers. LMP series mounting rods are cross drilled to accept a 3/16
hex wrench. This cross hole enables secure tightening to
AS spacers,
isolation table tops, or other mechanical devices.
The LMP's 0.984 diameter is the same as the mounting post for
MX110s,
MX6500s,
and
MX7500s.When
used as a support leg for a fixed-stage platform, the LMP-6 can be used to
attach any of these manipulators to create a rigid integrated mounting
point.
Post Mount Clamp
The AS-C post clamp is designed to mount to our
AS series
and LMP series posts as shown in the inset photo. The
symmetrical design has 8-32 and 1⁄4-20 tapped holes conveniently located
to attach a wide variety of devices. The clamp design will
accommodate diameters from .950 inch to 1.25 inch. The ASC is
available in a metric version by adding "-M" to the Model number.
|
|
New Products
