Large Mounting Plates
4080 and 8090 Series
The 4080 and 8090 series of mounting platforms offer a variety of apertured
platforms in standard and customer modified versions. These platforms
may be used as stand-alone platforms directly on the surface of a table
top or to add attachment points to an isolation table without tapped
holes. They are also useful for building bridge systems around microscopes
and can be supported with our
PSR series support posts or
AS series spacers. They have 1⁄4-20 clearance holes conveniently located near the
edge of the plate to facilitate mounting to our PSR and
AS series. Vertical or three dimensional configurations can be designed with the use
of our BB series building blocks and
AB-U universal angle bracket.
The material used in these platforms is a cast aluminum. This material
more thermal stability than standard aluminum plate, and because of the
manufacturing process it has no inherent stress. By using this material we
supply you with a more stable product. If you decide to do some custom
machining on the plates, you can be assured that they will not flex out of
flatness like standard plate materials.
4080Ps may be used with
PSR support rods to create a mounting platform
along side of an experiment. They are designed to be the center platform
fixed stage setup. The 4080P has been relieved in the center to simplify custom machining for the experimenter's applications. The PSR platform
support rods' 1.5-inch diameter makes them an ideal foundation for these
The 8090 series platforms are designed to be the sample platform
under a microscope or as an apertured platform for passing a LASER beam
through. They come in two models: blank and with aperture. The
8090Pb has a solid surface with 1⁄4-20 mounting holes and a non-tapped
section in the middle. This blank section is useful for custom
machining either by us or by the end user. The 8090P has an industry
standard 10.8 cm chamber aperture for mounting our PC-A perfusion chamber
adapter or other microscope chamber systems.
For custom configurations or if you need help
selecting the best platform configuration for your application, do not
hesitate to contact us at 1-877-313-6418.
Perfusion Chamber Adapters
The PC-A chamber adapter allows the user to mount our PC-V & PC-H
chambers into our 8090P platform. They are made of non-corrosive aluminum.
The 10.8-cm diameter model is compatible with Olympus microscope
stages and allows 360° rotation of the chamber. Alternatively, they also
are available in a 11-cm diameter size.
click on button for order form
Prices listed are for domestic U.S sales. International sales could be 10% higher