|
|
|
Perfusion
Chambers
Horizontal, Vertical, Round,
Petri dish & Glass slide
Perfusion Chambers
The PC series perfusion chambers have embedded magnets that are
conveniently located to retain perfusion plumbing and electrical grounds. They are
designed to fit into our 8090c fixed-stage platform. A standard 22 mm
cover slip is used to create the chamber bottom that is attached with
vacuum grease, silicon, or parafilm (use a heat gun to gently melt the
parafilm). There are two plastic retention screws for added security.
Both openings accept 13-mm round cover slips for cultured specimens.
PC series chambers come in four styles: horizontal, vertical, round and a
new version PC-35/50 that holds 35mm & 50mm Petri dishes and 25mm x 75mm
slides. All models have two small but very powerful magnets located next
to the input / output reservoirs and two more located closer to the
recording chamber. The PC-35/50 has six such magnets. The magnets are
located such that the clips will securely hold your perfusion plumbing or
ground wiring close to the final location.
8090c Platform
The 8090c perfusion chamber
platform is specifically designed with the electrophysiologist in mind.
The chamber is surrounded by perimeter mounting holes. The 8090c is
ideal for fixed stage electrophysiology setups. The drainage trough
around the chamber location is designed to protect your expensive
microscope optics by funneling the solution to the outer edge of the
platform and down the drainage tube to a safe location.
The chamber
receiver is located off of center and accepts our PC series perfusion
chambers. Clearance holes along the right and left hand edges allow
mounting as a stand-alone fixed-stage or as the center chamber platform in
a bridged platform setup.
|
|
| |
| |
| |
| |
|
Spec control drawing |
|
Model |
Description |
Price |
|
PC-A |
perfusion chamber adapter, 10.8cm dia. |
$250.00 |
|
PC-H |
perfusion chamber, horizontal,
with 4 clips
|
$125.00 |
|
PC-V
|
perfusion chamber, vertical, with
4 clips
|
$125.00 |
|
PC-R
|
perfusion chamber, round, with 4
clips
|
$125.00 |
|
PC-S |
Holder, perfusion chamber adapters |
$375.00 |
|
PC-35/50
|
perfusion chamber, holds 35mm &
50mm Petri dishes or 25mm x 75mm glass slides
|
$125.00 |
|
PC-HC
|
clips only, pkg of 5
|
$15.00 |
|
8090c
|
chamber platform, 8.0"x9.0" with
drain |
$250.00 |
|
Spec control drawing |
|
|
|
|
click on button for order form
Prices listed
are for domestic U.S. sales. International sales are 20% higher.
 |
|
|
|
New Products
