|
|
Perfusion Chambers
Horizontal, Vertical, Round
Perfusion Chambers
The PC series perfusion chambers have embedded magnets that are
conveniently located to retain perfusion plumbing and ground plugs. They
are
designed to fit into our 8090c fixed stage platform. A standard 22 mm
cover slip is used to create the chamber bottom that is attached with
vacuum grease, silicon, or Parafilm (use a heat gun to gently melt the
parafilm). There are two plastic retention screws for added security. Both
openings accept 13-mm round cover slips for cultured specimens.
PC series chambers come in three styles: horizontal, vertical, and round. All
models have two small but very powerful magnets located next to the
input/output reservoirs and two more located closer to the recording
chamber. The location of these magnets securely hold your perfusion
plumbing or ground wiring close to the final location.
|
|
| |
| |
|
 |
■
Non-corrosive LEXAN®
construction
■
Imbedded magnets
■
22-mm
Coverslip chamber bottom
Related
Products
AS-1A spacers
PSR support rods
MS-4.0 magnetic strip
MS-6.0 magnetic strip
8090P platform
|
|
 |
 |
|
 |
|
|
 |
The PC-A chamber
adapter allows the user to mount our PC-V and PC-H chambers into our
8090P platform. Their 10.8-cm diameter is also compatible with
Olympus microscope stages and allows 360° rotation of the chamber. |
|
 |
8090c
Platform
The 8090c perfusion chamber platform is specifically designed
with the electro physiologist in mind. With adequate mounting
holes and a drainage trough around the perimeter for solution
overflows. The 8090c is ideal for fixed stage electrophysiology
setups. The drainage trough is designed to protect your
expensive microscope optics by funneling the solution to the outer
edge of the platform and down the drainage tube to a safe location.
The chamber receiver is located off of center and accepts our
PC series perfusion chambers. Clearance holes along the right
and left hand edges allow mounting as a stand-alone fixed stage or as
the center chamber platform in a bridged platform setup.
for metric assembly features on this
product, add -M after
Model Number |
|
|
Spec control drawing |
Spec control drawing |
|
Model |
Description |
Price |
|
PC-H |
perfusion chamber, horizontal, with 4 clips |
$125.00 |
|
PC-V |
perfusion chamber, vertical, with 4 clips |
$125.00 |
|
PC-R |
perfusion chamber, round, with 4 clips |
$125.00 |
|
PC-HC |
clips only, pkg of 5 |
$15.00 |
|
8090c |
chamber platform, 8.0"x9.0" with drain
for metric assembly features on this
product, add -M after
Model Number |
$225.00 |
|
PC-A |
perfusion chamber adapter, 10.8cm dia. |
$225.00 |
|
PC-A11 |
perfusion chamber adapter, 11cm dia. |
$225.00 |
|
|
|
|
|
click on button for order form
Prices listed
are for domestic U.S. sales. International sales are 20% higher.
 |
|
|
|
Laboratory Mechanicals
