|
 |
Optics Accessories
Objective
The Gradient Contrast Illuminator, when
mounted in lieu of the OEM condenser in infinity-corrected microscopes,
provides contrast enhancement similar to that achieved by DIC, phase
contrast, and other contrast-enhancement methods.
More >>> |
|
|
 |
Optics Accessories
Objective
LED light source.
More >>> |
|
|
 |
Fiber Light Guide
External
Focused Laser Guide
The FLG-SMA fiber light guide is
ideal for bringing laser light into an experiment independently of the
microscope optics. The 2-meter fiber cable has a 600 micron core
to maximize coupling efficiency across a wide range of wavelengths and
input powers.
More >>> |
|
 |
Solution
Switcher
High Speed Solution Switcher
The MXPZT-300 series solution switcher uses a
high-speed piezo flexure guided nano positioner to move pipette tips in
solution switching applications. It can move an electrode tip across a 5 µm thick
theta glass septum. This system is ideal for measuring cellular response to
drugs or other elements in solution.
More >>> |
|
|
 |
Imaging System
MRK200 Modular Infrared /
Fluorescence
The MRK200 imaging system is completely
modular and can be purchased as a complete system or purchased as
individual units to accommodate other applications. Individual units
include a motorized XY platform, a camera tower with condenser and upper
optics tube, and a gradient contrast optics assembly.
More >>> |
|
 |
Micromanipulators
Manual, Low Profile, 4-axis
The MX50.5 series of manual
manipulators are built from our low profile 50.5cr crossed roller stages
and provide four-axis control in a very small package. They are
ideal for positioning stimulating electrodes, MX610 or MX630 hydraulic
micromanipulators, puffer pipettes, suction pipettes or the devices in a
microscope’s field of view.
More >>> |
|
|
 |
Micromanipulators
Manual
Base Mount, Crossed Roller, 4-axis
The MX100.5 series of manual
manipulators are built from our low profile 100.5cr crossed roller stages
and are ideal for positioning stimulating electrodes, MX610 or MX630
hydraulic micromanipulators, puffer pipettes, suction pipettes or the
devices in a microscope’s field of view. They come
standard with 100TPI adjustment screws and large color coded knobs for
improved feel and resolution.
More >>> |
|
 |
Perfusion
Chambers
Horizontal, Vertical, Round,
Petri dish & Glass slide
The PC series perfusion
chambers have embedded magnets that are conveniently located to retain
perfusion plumbing and ground plugs. They are
designed to fit into our 8090c fixed-stage platform.
More >>> |
|
|
 |
Platform Translators
Manual,
Crossed Roller
The top of the MXOP and
MXZP confocal platform systems are tapped with 1⁄4-20 threaded holes on
1.0-inch centers. This 16.5" x 24.0" platform is supported by
our 100cr series stages to ensure maximum stability across the
entire platform and has external locks on the drive stages located
on the right-hand side.
More >>> |
|
 |
Platform Translators
Motorized, Crossed Roller
The top of the MXOPi.2 & MXZPi.2
confocal platform systems are tapped with 1⁄4-20 threaded holes on
1.0-inch centers.
This 16.5" x 24.0" platform is supported by our
100cri (X-axis) &
200cri (Y-axis)
motorized crossed roller stages to ensure maximum stability across the
entire platform.
More >>> |
|
|
 |
Sample Shuttle
System
XYZ Chamber Shuttle
The MX100S is ideal for experiments where removal of
the sample chamber needs
to be done repeatedly.
The upper Y-axis stage uses our 400cr
stage with
our Lt-series long-travel adjustment screws.
More >>> |
|
|
New Products
