Miniature, 1 inch
The RM80-1.0 and RM80-1.0H are designed to be used with our
OMH series optical mirror holders. The 1/4-inch thick back plate uses
80TPI precision rolled adjustment screws to provide stable movement.
screws for the RM80-1.0 use knurled DelrinŽ screw caps to ensure non-slip
finger adjustments. A 5/64 hex wrench is used to adjust the RM80- 1.0H,
which minimizes inadvertent movement.
Both models have
one 8-32 mounting hole on the edge of the back plate for vertical mounting
and another 8-32 mounting hole centered on the face of the back plate for
horizontal mounting on our PR or MPR series mounting rods.