Motorized Focus Drive

   The MXMS-MFi is designed to attach to our MXMS series microscope translators and drive the manual focus knob on the microscope.  Some of the most common microscopes used in electrophysiology today have the focus
knob at the back of the microscope base.  This location makes it difficult to access and, in some cases, may disturb the stability of the experiment merely by touching the scope.  This motorized drive solves these problems by bringing
the focus control to the handheld controller unit thereby isolating and eliminating the motion of the user’s hand.
   Like all of our motorized devices the MXMS-MFi uses electrically quiet running DC servo motors that can run inside the electrophysiology rig without disturbing recordings.  All cabling is shielded, and there is an ENABLE/DISABLE switch to disengage the motor drive when manual adjustments are required.

Manual Focus Drive for Zeiss Axioskop 1 FS and 2 FS

  The MXMS-MF is designed to attach to our MXMS series microscope translators and drive the manual focus knob on the microscope.  The MXMS-MF transfers the focus knob to the front of the microscope translator.