Lens Positioners, High Precision

2.0-inch Optic

Optic Translators

   The new OTX2.0 series optical translators are an OEM version of our popular OT2.0 series.  These compact optical translators incorporate crossed roller bearings for zero crosstalk between X & Y axis adjustments.  Precision rolled 100TPI adjustment screws enable submicron adjustment across the full travel of the X & Y axes, with smooth feel to the adjustment.  Foil locks on all axes have been tested to 4g’s to maintain adjustment in challenging environments.  The Z-axis on the OTX2.0-3 and OTX2.0-5 uses a internal 80 pitch tread.  The drive knob for the Z-axis has 6 locking screws and 6 capstan drive holes that maximize accessibility in any orientation.

   The OTX2.0-5 uses our patented spring-loaded (pat. # 6590723) pivot for the tip/tilt of the XYZ stage.  Though the motion is not true gimbal, it does rotate about the optical center.  One clear benefit of this design is the location of the adjustment screws above the beam path.  Like many of our mirror mounts, the OTX2.0 series uses our one wrench design, which allows the user to adjust the optic position and lock all adjustment axes with one wrench.

   OTX2.0 optical translators are compatible with our OH2.0 series of optics holders for microscope objectives, 0.25-inch optic, and custom optic mounting.