The DR1000 digital readout provides an accurate, highly visible display for axis position.  The digital readout may be installed on any of our e series controllers and is connected in series via a double-sided connector between the controller junction box and the device D connector.  Each digital readout reads a single axis position and requires its own power supply.  Additional units may be used to monitor multiple axes.  The DR1000 reads from 20 mm down to 0.1 μm and has a face mounted ZERO SET button.  The DR1000 uses a separate wall mounted power supply as its source for clean DC power and all cables are shielded to ensure noise-free operation during sensitive electrophysiology experiments.  The slim and light weight case may be mounted separately or stacked on top of each other in multiple axis applications.