|
CONFOCAL XY TRANSLATORS
MXZP
The MXZP platform system can
be custom tailored to suit the needs of the end user. The platform
configuration that is pictured is just one of many that have been
produced.
The system is supported by our
100cr series stages (crossed roller). They are available in manual or
motorized versions. A full 25mm of travel is provided on both models
The manual
versions, can be fitted with either 20, 40, 80, or 100
TPI adjustment screws with resolution from 20 µm down to 5 µm,
respectively. Please specify which pitch of adjustment screw you require
when ordering. Replace -xx in the Model Number with the desired thread.
Motorized versions can be
controlled with any e series and
MC2000 controllers. Our controllers
drive the stage through a closed loop interface between the controller
and the motor encoder. The closed loop connection ensures 0.2 µm and
0.1 µm resolution, respectively. The encoder coupling also enables the
use of the
DR1000 digital readout for repeated or relative positioning
requirements. All cables are shielded to ensure noise-free operation
during sensitive electrophysiology experiments.
Please include the
name of the manufacturer and complete model number of your microscope when
ordering.
|
Laboratory Mechanicals
